How to improve WiFi signal at home with 5 simple tricks

to navigate in InternetMost people work from home or play with friends, and use communication Wi-Fi. However, this technology has a large number of natural enemies: from walls and ceilings, some electronic devices, as well as mirrors and metal surfaces. On this note, Five tips to avoid signal problems.

In most cases, a decrease in performance occurs due to The router is reaching its limits. That is, the connection comes from a point that is often far from the areas you need.

Although there are no miracles in technology, experts from devolo – Which specializes in the development of signal amplifiers through the electrical network – It offers five simple tricks to improve your WiFi signal.

Coverage analysis

How do you know when a domain fails Photo Shutterstock

Users are aware of the limitations of Wi-Fi coverage at home. However, there are some Analysis tools that can paint a more accurate picture.

This software is considered freemiun, and published Visual map of the wireless network It allows identifying dead zones (in red) without coverage and where there is good reception (green) to place access points.

Best apps for network layout planning They are NetSpot, Wifi Analyzer, Ekahau HeatMapper, and Fast. With fewer features but for free, Acrylic Wifi and WirelessNetView appear.

router position

The router must not be locked.

The router must not be locked.

If the Wi-Fi is very slow or the connection stops completely, it is usually due to a range issue, as is the case in many homes router at some anglebehind a flowerpot or worse, even in the basement.

See also  They found the fossil of a feral sea predator that lived millions of years ago

A central and slightly elevated location is ideal for your site, for example, On a shelf in the middle of the room Or partition, so that the signal is better distributed.

The router must not be locked Among the other things in front of himto. It’s also not a bad idea to move some of the antennas you come with to each side.

Latest Models

If for some reason the router stops working or does not turn on its lights, The new model will need to support Wi-Fi 5 (Wi-Fi ac) or even Wi-Fi 6.

The Wi-Fi 6 standard was ratified in early 2019 among other details It has advantages such as better transfer rates and compatibility by the above criteria. Both standards are much faster than Wi-Fi 4 (Wi-Fi n).

Also, part of Wi-Fi 4, the 2.4GHz band, Too loaded In many large urban areas. To restore speed, it is convenient to use the 5GHz band, which has a shorter range but greater power.


In a large one-story or single-family house, there may be large spaces, Reinforced concrete walls or even ceilings between router and devices which one hopes to contact.

These obstacles act as a brake to becoming a Wi-Fi network Slower and slower, and at worst, it stops completely. A Wi-Fi repeater is useful for shorter distances, for example, from one room to another.

Repeaters are the cheapest alternative to extend network coverage. What they do is capture the signal and amplify it even further.

The signal amplified by the Wi-Fi repeater is exactly the same as that sent by the router, with the same name and password. You also need to configure it to be recognized.

See also  The Iranian regime admitted to extracting more than 20% of enriched uranium

maximum range

devolo converters transmit the Internet signal through the electrical current (Powerline technology) in every home.

devolo converters transmit the Internet signal through the electrical current (Powerline technology) in every home.

The repeater is no longer suitable when the distance is too wide. However, there is also a more expensive but simpler and more effective technical solution. It’s about Powerline adapters.

These devices take advantage of the home’s electrical circuit like a long data cable. The advantage is that reinforced concrete walls and ceilings and even underfloor heating systems are no longer an obstacle.

These transformers Create a quick access point in any port. Installation is very easy. It is enough to connect one of them near the modem and the other in the place where you want to carry the signal and synchronize it with a button.


Freddie Dawson

"Beer specialist. Award-winning tv enthusiast. Bacon ninja. Hipster-friendly web advocate. Total social media junkie. Gamer. Amateur writer. Creator."

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top