An easy trick to whiten the joints between tiles

Tile joint cleaning trick

Tile joint cleaning trick

In all homes over time, you can see Dirt buildup between tiles from the floor and walls of the bathroom or kitchen. This gives a dirty and unpleasant look to your spaces, which should be avoided at all costs. Fortunately, there is Easy and effective home cleaning methods To restore the color starts from this space between the ceramic pieces.

he Sodium bicarbonate It is one of the most used ingredients for cleaning, cooking, and even to combat heartburn, so it can be found in most kitchens. If you also have it on hand, now You can leave your own glowing tiles union in a quick and permanent manner. Even if you clean them frequently, you can follow our tips to prevent mold build-up and, in turn, darkening.

How do you clean joints between tiles with baking soda?

No matter how often the surfaces are cleaned, the spaces between the ceramics or the tiles gradually fade and turn from a nice white color to gray and even black which takes away much of the beauty from the place. to check restore its original colorYou should only have the kitchen products that we will mention below: Baking soda, white vinegar, and water. The special treatment, which we now recommend, should be repeated once a month, so that you can regain the whiteness of the joints that we know you are missing.

Cleaning of bicarbonate tile joints

The cleaning process begins Heat a cup of water. In another bowl, measure out another cup of White vinegar When the water starts to get hot, turn off the heat and mix it with white vinegar. At this time, add gradually A cup of baking soda powder. You can add a section and wait a moment for the reaction between the baking soda and the vinegar to stop, to prevent it from spilling out.

See also  Uncensored "cattle tourism": The government has no data on Argentines who traveled to Miami and could be vaccinated again in the country

Try to make the mixture as homogeneous and compact as possible. If you notice the mixture is too runny, add more baking soda, and the idea is business Semi-liquid paste that you can apply easily. When the mixture is ready, use a brush and apply putty to the joints and Let it rest for at least 30 minutes.

The last steps to leave the tiles or tiles nickel plated

Use the brush to scrub in the cavity between the tiles to avoid this Remove dirt that is giving it that gray or black hue. As you remove all the accumulated residue, you will be able to notice the whitening effect of the mixture and how the original color is beginning to appear.

When you are satisfied with the result, Rinse and clean as you normally would. If the dirt persists, you have to repeat the trick again, you just have to be persistent to see the results you want.

Freddie Dawson

"Beer specialist. Award-winning tv enthusiast. Bacon ninja. Hipster-friendly web advocate. Total social media junkie. Gamer. Amateur writer. Creator."

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top